Cougar per Modellismo RC Auto da Corsa

AX019 - AEROX FRONT WING

AX019 - AEROX FRONT WING

€ 6,00
CR177 - CORE RC Big Bore Spring Tuning

CR177 - CORE RC Big Bore Spring Tuning

Core RC are pleased to bring you these new Progressive Big Bore Springs for 1/10th Off Road.These high quality precision made springs allow the car to float over bumps but not roll too much during cornering. The consistent wire diameter means that the characteristics of each spring in the range is similar, giving a consistent performance across the range. The spring stiffness increment...
€ 23,00
CR179 - Big Bore Spring; Med White - 2.8

CR179 - Big Bore Spring; Med White - 2.8

Core RC are pleased to bring you these new Progressive Big Bore Springs for 1/10th Off Road.These high quality precision made springs allow the car to float over bumps but not roll too much during cornering. The consistent wire diameter means that the characteristics of each spring in the range is similar, giving a consistent performance across the range. The spring stiffness increment...
€ 5,80
CR180 - Big Bore Spring; Med Red - 3.1

CR180 - Big Bore Spring; Med Red - 3.1

Core RC are pleased to bring you these new Progressive Big Bore Springs for 1/10th Off Road.These high quality precision made springs allow the car to float over bumps but not roll too much during cornering. The consistent wire diameter means that the characteristics of each spring in the range is similar, giving a consistent performance across the range. The spring stiffness increment...
€ 5,80
CR181 - Big Bore Spring; Med Green - 3.4

CR181 - Big Bore Spring; Med Green - 3.4

Core RC are pleased to bring you these new Progressive Big Bore Springs for 1/10th Off Road.These high quality precision made springs allow the car to float over bumps but not roll too much during cornering. The consistent wire diameter means that the characteristics of each spring in the range is similar, giving a consistent performance across the range. The spring stiffness increment...
€ 5,80
CR182 - Big Bore Spring; Med Blue - 3.7 pr

CR182 - Big Bore Spring; Med Blue - 3.7 pr

Core RC are pleased to bring you these new Progressive Big Bore Springs for 1/10th Off Road.These high quality precision made springs allow the car to float over bumps but not roll too much during cornering. The consistent wire diameter means that the characteristics of each spring in the range is similar, giving a consistent performance across the range. The spring stiffness increment...
€ 5,80
CR183 - Big Bore Spring; Med Black - 4.0 p

CR183 - Big Bore Spring; Med Black - 4.0 p

Core RC are please to bring you these new Progressive Big Bore Springs for 1/10th Off Road. These high quality precision made springs allow the car to float over bumps but not roll too much during cornering. The consistent wire diameter means that the characteristics of each spring in the range is similar, giving a consistent performance across the range. The spring stiffness...
€ 5,80
CR190 - CORE RC SPRING SEAT - BIG BORE TO 13MM (4)

CR190 - CORE RC SPRING SEAT - BIG BORE TO 13MM (4)

Special carbon fibre spring seat to enable the use of big bore springs on small bore (13mm) shocks.
€ 5,50
CR191 - CORE RC Spring Seat - Big Bore

CR191 - CORE RC Spring Seat - Big Bore

Special carbon fibre spring seat to enable the use of big bore springs on small bore (14mm) shocks.
€ 5,50
CR635 - Big Bore Spring; Med Orange - 4.3

CR635 - Big Bore Spring; Med Orange - 4.3

Core RC are pleased to bring you these new Progressive Big Bore Springs for 1/10th Off Road.These high quality precision made springs allow the car to float over bumps but not roll too much during cornering. The consistent wire diameter means that the characteristics of each spring in the range is similar, giving a consistent performance across the range. The spring stiffness increment...
€ 6,00
CR636 - Big Bore Spring; Med Yellow - 4.6

CR636 - Big Bore Spring; Med Yellow - 4.6

Core RC are pleased to bring you these new Progressive Big Bore Springs for 1/10th Off Road.These high quality precision made springs allow the car to float over bumps but not roll too much during cornering. The consistent wire diameter means that the characteristics of each spring in the range is similar, giving a consistent performance across the range. The spring stiffness increment...
€ 6,00
KRC-LDCAMBER - KLINIK RC REAR CAMBER MOUNT - LAYDOWN

KRC-LDCAMBER - KLINIK RC REAR CAMBER MOUNT - LAYDOWN

7075 T6 Aluminum 3mm Rear Camber Mount for the Cougar Laydown Buggy! The mounts are aimed at astro and carpet racers that have needed to stack 3-6mm in washers to obtain different roll center for higher grip surfaces. These add tremendous strength to the rear inner ball mount when running a higher roll center. No washers installed is the same as the stock geometry with 3mm washer, hence...
€ 16,00
KRC-SCHCRADLE - KLINIK RC COUGAR KC/LAYDOWN BATTERY CRADLE KIT

KRC-SCHCRADLE - KLINIK RC COUGAR KC/LAYDOWN BATTERY CRADLE KIT

Simple Battery Cradle system for the Schumacher Cougar KC KD and NEW Laydown buggies using motor position 4. Works with both full size shorty and LCG packs! CNC milled from 3mm carbon fiber. Allows changing batteries or adjusting battery position very simple and easy!  Includes: CNC Carbon fiber battery cradle 2x CNC Carbon fiber spacers 2x 3x18 screws 2x Gold plated flanged...
€ 28,50
KRC-TBLD - KLINIK RC COUGAR LAYDOWN TI TURNBUCKLE SET

KRC-TBLD - KLINIK RC COUGAR LAYDOWN TI TURNBUCKLE SET

Titanium turnbuckle set for the Cougar Laydown, super light!
€ 29,99
PCB001 - PENGUIN COUGAR LAYDOWN BODY + MASK

PCB001 - PENGUIN COUGAR LAYDOWN BODY + MASK

Penguin Customer Bodyshell for the Cougar Laydown. Manufactured from high quality .75mm lexan. Removed rear bodymount and snug spur fit gives the body a low and sleek look keeping the weight down at the same time. Supplied clear with window masks.
€ 19,90
PCB005 - PENGUIN LAYDOWN DART BODY CLEAR + MASK

PCB005 - PENGUIN LAYDOWN DART BODY CLEAR + MASK

The new DART Bodyshell for the Cougar Laydown is specifically designed for low profile LiPo's, ideally 22.5mm and below.  The body has a low sleek look and a lower centre of gravity.  Includes overspray film, window masks and Penguin decal.  Standard weigh version 0.75mm thick. (Standard height 25mm LiPo's will fit under but do touch the body.)
€ 19,90
PCB007 - Penguin Emperor Wing - 1mm

PCB007 - Penguin Emperor Wing - 1mm

€ 8,00
PCB018 - PENGUIN LD2 BODY + MASK - 0.75MM

PCB018 - PENGUIN LD2 BODY + MASK - 0.75MM

€ 24,00
U1548 - SPEED PACK - M3 Washers

U1548 - SPEED PACK - M3 Washers

€ 2,50
U1551 - SPEED PACK - E Clips -2 x 8pcs

U1551 - SPEED PACK - E Clips -2 x 8pcs

€ 2,50
U1633 - SPEED PACK - Small Pins (pk)

U1633 - SPEED PACK - Small Pins (pk)

€ 2,20
U1960 - SPEED PACK - O Rings; Various

U1960 - SPEED PACK - O Rings; Various

SPEED PACK - O Rings; Various
€ 2,50
U2128 - SPEED PACK - Grub-Set Screws M3 M4

U2128 - SPEED PACK - Grub-Set Screws M3 M4

€ 2,20
U2698 - Ball Bearing - 5x10x4 Red Seal - (pr)

U2698 - Ball Bearing - 5x10x4 Red Seal - (pr)

Ball Bearing - 5x10x4 Sealed (pr)
€ 4,50