Ricambi & Accesori per Modellismo RC Auto da Corsa

106290 - HUDY Ultimate Solder

106290 - HUDY Ultimate Solder

  Ultimate solder for the RC professional is 1.0mm thick and 60/40 Sn/Pb. Contains 3.3% flux core. The 3m length of solder is nicely rolled into a tiny tube, yet is easy to pull out through the dispensing hole in the cap.
€ 8,00
2497-2 - MOTOR | ROTOR STORAGE BOX

2497-2 - MOTOR | ROTOR STORAGE BOX

Being organized is the name of the game. The best organized, best prepared racers are typically the ones reaching for that top step of the podium. JConcepts has reached into their bag of tricks to help racer organization. The motor | rotor box includes plenty of space for assembled motors, individually spaced rotors and a pocket for miscellaneous motor tuning items. The...
€ 11,99
30800006 - Rotor Replacement Tool

30800006 - Rotor Replacement Tool

Product information "Hobbywing Rotor Replacement Tool"Practical helper! Having disassembled your engine it is often difficult to place the rotor correct in the motorcase. Due to the high magnetic forces it is difficult to place the rotor in the rear ball bearing. With the ingeniously simple tool reassembly becomes now very easy. Insert the tool into the motor housing, insert the...
€ 15,00
30820001 - Ball Bearing for Xerun 1/10 Motor 3.175x9.525x3.967mm

30820001 - Ball Bearing for Xerun 1/10 Motor 3.175x9.525x3.967mm

€ 9,90
30820055 - Endbell set for Xerun V10-G3

30820055 - Endbell set for Xerun V10-G3

Endbell setMODIFIED V10 G3 (3.5T-8.5T)STOCK V10 G3 / G3R (10.5T- 25.5T)skuType30820057 Modified for 3.5-5.0T (Hole B)30820056 Modified for 5.5-8.5T (Hole S)30820055STOCK motor for 10.5-25.5T (Hole B) G3/ G3RWhat's in the box?Endbell and Frontbell (a pair)3x motor shell screws
€ 35,00
30820056 - Endbell set for Xerun V10-G3

30820056 - Endbell set for Xerun V10-G3

Endbell setMODIFIED V10 G3 (3.5T-8.5T)STOCK V10 G3 / G3R (10.5T- 25.5T)skuType30820057 Modified for 3.5-5.0T (Hole B)30820056 Modified for 5.5-8.5T (Hole S)30820055STOCK motor for 10.5-25.5T (Hole B) G3/ G3RWhat's in the box?Endbell and Frontbell (a pair)3x motor shell screws
€ 35,00
30820057 - Endbell set for Xerun V10-G3

30820057 - Endbell set for Xerun V10-G3

MODIFIED V10 G3 (3.5T-8.5T)STOCK V10 G3 / G3R (10.5T- 25.5T)skuType30820057 Modified for 3.5-5.0T (Hole B)30820056 Modified for 5.5-8.5T (Hole S)30820055STOCK motor for 10.5-25.5T (Hole B) G3/ G3RWhat's in the box?Endbell and Frontbell (a pair)3x motor shell screws
€ 35,00
30850009 - Switch for XR10 Stock Spec

30850009 - Switch for XR10 Stock Spec

EPS: Electronic Power Switch for 1/10th CarThis Electronic Power Switch controls the ON/OFF of current flow electronically. This helps solving problems caused by vibration or oxidation of contacts conventional mechanical switches have.
€ 7,00
50614 - X12/X20 30° FIXED TIMING SENSOR SET

50614 - X12/X20 30° FIXED TIMING SENSOR SET

Equal opportunities and fairness are the guiding ideas of race series all over the world – no matter, if on club, local, regional, National or International levels.     Unfortunately, there are always some drivers trying to get an advantage from manipulating the car or its electronics equipment.       Therefore, LRP has developed the new LRP...
€ 8,99
50636 - X20/X12 WORKSTEAM ROTOR - 12.0MM

50636 - X20/X12 WORKSTEAM ROTOR - 12.0MM

€ 19,99
50637 - X20/X12 WORKSTEAM ROTOR - 12.5MM

50637 - X20/X12 WORKSTEAM ROTOR - 12.5MM

€ 19,99
50638 - X20/X12 WORKSTEAM ROTOR - 13.0MM

50638 - X20/X12 WORKSTEAM ROTOR - 13.0MM

€ 19,99